More control
and safety,
less trauma.

 
 
 
Capa-instrum.jpg
 

Our high performance instruments allow for greater control and precision. Technologies that simplify implant dentistry for an enhanced patient focus. Our modern solutions provide reliable results with faster and safer procedures for professionals and patients.

 

Conical Drills

Customized for special Implant geometries

inst1.jpg

Safety, control and durability*

Design helps to avoid undesired movements and overdrilling
3 cutting angles providing low friction

Easy, Safe and Simplified Installation (!)

Conical Drills have the same Implant geometry
Only 2-3 Drills to install Implants Ø3.75 or 4.0
No pilot drill, counter sink or screw tap required

6 Conical Drills for all Implants

Interfaces and Geometries: HEX-S | HEX | AMP-S | AMP | MT
Diameters:  3.3 | 3.75 | 4.0 | 4.8 | 5.0
Lengths: 6 – 15 mm
Surfaces: Ospol® | M+N

Dense Drills. Careful removal of cortical bone (!)

Gradual preparation of coronal region at low speed | 15 - 50 rpm
Avoid use of counter sink and screw tap

(!) See Surgical Sequence.
*When Instruments are correctly cleaned and sterilized individually, without contact, and in the absence of any mechanical damages. The full view of the Drill markings occurs when the tools are in rotation. See Instrument Guidance.

 
 
Capa-instrum2.jpg
 

Implant Insertion Drivers

inst2ENG.jpg

Simplification

Same Driver for all Implants and Interfaces*
One Driver for manual use, handpiece and Torque Wrench

Biological References

Biological width, esthetic and dimensional references during surgery**

(!) See Surgical Sequence.
*Except HEX-S and HEX Platform Ø3.5.
** Indication of biological width and alignment of Components slices and flats to Implant index.


Torque Wrench

inst3.jpg

Surgical and Prosthetic

Biosafety | Only 2 easy-to-clean parts
High precision | Does not require adjustments
Implant and Prosthetic Drivers adapt directly

Prosthetic Reversibility

Morse Taper Retriever

inst4.jpg

Reverses effective Morse sealing of Components without transmission of stress to tissue

One Universal Driver

Prosthetic Driver

inst5.jpg

Hexagonal Ø1.2 Driver for all Components and Interfaces*
Captures Screws*
Driver directly adapts to Torque Wrench

* Except straight Conical Abutment.
Prosthetic Drivers are optionally supplied with permanent Driver Adapter (single piece). Please check availability in your region.

 
 

ORDER HERE

 

More about P-I Instruments

Product Catalog